GlucoMen® areo - 48748 - 06/19
UK
33
You do not need to set the date and time if you insert new batteries within 2 minutes after removing the
old ones.
If batteries replacement takes longer than 2 minutes, the meter will automatically require to reset Date and
Time before any operation (see 6.1).
Replace the batteries as follows:
a
. Make sure the meter is switched off.
b
. Remove the battery cover at the rear of the meter.
c
. Remove the batteries.
d
. Fit the new batteries into the battery holder with the “+” pole facing upwards.
e
. Close the battery holder.
WARNING
●
If the batteries are inserted upside down, the meter will not operate.
●
The meter clock may stop if you touch the metal parts inside the meter with your hands
or metal.
●
If you replace batteries after 2 minutes and do not set the time, all subsequent test
results will be stored with the incorrect date and time.
●
Dispose of old batteries according to local environmental regulations.
7. METER CARE
Uncontrolled Copy
Effective