1
.
Remove components from carton
and place spreader upside down on a
padded surface. For easier assembly,
remove the defector shield by loosening
the two wing bolts. Install LH. & RH.
handle braces to frame as shown using
four (4) 1/4-20 x 2 1/4” hex bolts and
nuts but do not tighten.
ASSEMBLY
ASSEMBLY
ASSEMBLY
ASSEMBLY
3
.
Turn spreader upright and install end of
handle tube with DOT between handle
braces as shown. Secure with (2) 1/4-20 x
1 1/2” hex bolts and nuts. Tighten bolts left
loose in Step #1.
2
.
Slide wheels onto end of axle with
the hub facing toward frame. Wheels are
identical to ease assembly. Align the
hole in the wheel hub and the hole in the
axle as shown. Secure drive wheel to
axle with 3/16 dia x 2” cotter pin. Insert
1/8 dia x 1 1/4” cotter pin in the hole
near the end of axle to retain free
turning wheel.
1/4-20 x 1 1/2”
Hex Bolt
1/4-20
Hex Nut
Handle
Tube
DOT
RH. Handle
Brace
LH. Handle
Brace
1/4-20 x 2 1/4”
Hex Bolt & Nut
Drive Wheel
Free Turning
Wheel
3/16 Dia x 2”
Cotter Pin
1/8 Dia x 1 1/4”
Cotter Pin
2
Deflector
Shield
S
Loosen Wing
Nuts to
remove shield
