Frontpanel led’s/functions:
ndshaking
-
ON
=
ADSL
is
connected
Ports 1 - 4:
- OFF = WLAN is not activated
- ON = Network connection is activated
-
Flashing
=
data
in
LAN
PPP:
- OFF = Network connection is not activated
PWR:
ADSL:
- ON = power on
- OFF = no ADSL connection
- OFF = power off
- Flashing = ADSL ha
WL/ACT:
- Random flash = data in ADSL line
- ON = WLAN is activated
- Flashing = data in WLAN
- Flashing = connecting PPP
- ON = PPP connected
- OFF = no PPP connection
Start installation:
In defaults RoadRunner 24AP(i+) ADSL modem have bridged ADSL connection for IPTV use (or for other use where
ou need public IP address for device) on port 4 which is marked as
IPTV
. On ports 1, 2 and 3 marked as
ATA/VOICE
and WLAN connection have NAT and firewall in use to secure your computer Internet connection.
Easy installation will be guaranteed by modem own DHCP server, which shares automatically IP addresses to your
computers. Modify/check only your
1
our Internet connection is ready
to use.
you use modem wireless connection, is
extremely important
to add encryption to safe your wireless connection as in
step
8
”
Setting up wireless network and security
” has been told. Wireless network is not active in defaults. To take
wireless network in use, make settings as in step
2
.
If your ISP uses other VPI/VCI values than saved defaults in modem, you can make setting as in step
3
is told.
you som
e in ports 1, 2 and 3 and in WLAN connection,
you can set
must be enabled
before cha
idge.
sa
,
Sonera
,
DNA,
Telia
. Mod
re,
0/100, 0/33, 8/35, 0/32,
0/50, 0/40
Bridged c
If you have
pure bridge, you have to reset to factory defaults to configure it again.
t when you press reset button back of the modem about 10 seconds when modem has power
y
D
computer network settings as in step is told and y
If
If
e reason do not want to use modem own NAT/Firewall featur
is told. In
modem as pure bridge as in step
4
this case your computer firewall software
nge modem to pure br
* All (RFC
bridged connections
ovided
li
1483/2684)
pr
by ISP do work in defaults, example.
E
which hunts these
VPI/VCI
values automatically:
em supports
Auto Hunt
featu
Supported browsers are Internet Explorer 5.x, Netscape 6.x or later.
Internet br
any
setting configu
owser can not have
Proxy
red.
onnection:
configured ADSL modem as
Reset to factory defaults:
Factory defaults can be rese
on.
3
