A-iPower PWF3200SH, Owner'S Manual

Page: 12 / 80

SET UP 10
FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598
3. Connect the pressure hose to the pump
outlet fitting and tighten the nut firmly by
hand, DO NOT use any tool to tighten.
See Figure C .
Figure C
4. Connect the pressure hose to the
handle of the spray gun and tighten the
nut firmly by hand.
See Figure D.
Figure D
5. Remove the protective cap on the wand
Wand
Spray gun tip
inlet. Insert the wand into the spray gun
tip and tighten the nut firmly by hand.
See Figure E .
Figure E
1.
See Figure A.
Figure A
Figure B
Take out the end cap in the frame,attach
the handle on to the frame by inserting
the clip.
2.Attach the hose holder to the panel.
See Figure B.
Assembly