A-iPower AP170F, Operating Manual

Page: 6 / 52

4. PRE-OPERATION INSPECTION
4-1. Fuel Inspection
· Is there gasoline in the tank?
· Is old gasoline being used?
· Is the fuel tank cap closed correctly?
WARNING:
Be sufficiently careful of heat and flame when handling the fuel. Not doing so could cause fire or explosion.
4-2. Air-cleaner Inspection
· Is the air-cleaner element dirty?
· When the air-cleaner element is dirty, clean it.
4-3. Engine Oil Inspection
· Is the engine filled with the recommended engine oil, and is the oil dirty?
· If there is not enough oil, if it is dirty, or it has been used longer than the specified time,
add or change the engine oil.
4-4. Inspect the Tightness of all Fasteners or Screws
· Are all the screws tight?
· Be sure to check the screw used to fasten the muffler.
(Do this when the muffler is cold)
4-5. Fuel and Oil Leaks Inspection
· Are there any fuel or oil leaks? If any are found repair them.
4 4