12.)
Lift the right wing wing tip until the nose fitting engages. When lifting the wing, make sure that
the other wing does not slip backwards.
Page
6
13.)
Secure the bolt with a
safety ring.
14.)
Remove the Velcro straps and wingtip bags and stretch
the sail outwards
and insert the
wing tube. Reach through the hole under the spoiler with the other hand and
insert the tube into the D-spar.
Important:
Insert the tube as far as it will go, so the triangle
mark is flush with the spar.
16.)
Insert the winglet into the outer tube, making sure that the spring catches engage.
17.)
Pull out the carbon shells and press onto the Velcro
so the shell is connected to
Take care not to bend the spoilers - they can break!
15.)
Insert the
aluminum outer wing tubes (green - right, red - left). Open the sail on the wingtip
at the wing tip and
D-spar
18.) Reach inside the sail from the wingtip and connect the outermost three ribs.
19.) Unfold and attach the outermost rib on the carbon fiber spar by reaching into the access holes
in the sail. Secure the outermost 4 ribs with bungees.
