616000191_ENG Rev. 111114-0
3 - 12
The AEB214 PLUS Hand-Held Tester can be used with all vehicles that use OBD2 (American standard)
and EOBD (European standard) diagnostic systems.
The following operations can be performed with the AEB214 PLUS Tester:
- display of vehicle operating parameters (engine RPM, engine temperature, etc.);
- readout and zeroing of errors stored by the original injection control unit;
- determination of the type of OBD2 µFIX Emulator required for the vehicle connected to the Tester.
The Tester is equipped with a reprogrammable memory that enables the unit to receive future updates and
partially complies with ISO 15031-4.
1.1 Description of the Tester
1) Micro USB port for connection to a PC.
2) Connector for connecting to the diagnostic port on the vehicle.
3) Backlit dot-matrix LCD display.
4) [ ESC ] key for exiting the page and returning to the previous menu.
5) [
] key for moving the cursor or scrolling the page upwards.
6) [ OK ] key for confirming data or entering a page.
7) [
] key for moving the cursor to the previous page.
8) [
] key for accessing the help page.
9) [
] key for moving the cursor to the next page.
10) [ C ] key for deselecting parameters.
11) [
] key for moving the cursor or scrolling the page downwards.
12)
[
S
]
key for selecting parameters.
1.2 Pack contents
The Tester is supplied in a carrying case that contains:
1 OBD2 Diagnostic Tester.
1 cable for connecting to an OBD diagnostic port (type SAE J1962 /
ISO15031-3).
1 USB/microUSB cable for connecting the tester to a PC.
1.3 Switching on the Tester
The AEB214 PLUS Tester switches on automatically when it is connected
to the vehicle’s diagnostic port using the cable provided. When it
switches on, the A.E.B. logo and the version of the programme appear
on the display (Fig. 1).
Press the ESC or OK key to access the main page (Fig .2). Press any
other key to select the desired language.
1
2
3
5
6
4
9
7
12
11
10
8
TESTER-to-OBD CONNECTING
CABLE
VEHICLE OBD
CONNECTOR
OBD TESTER
Code AEB214 PLUS
