5 (16)
Installation instructions
Important: test the range of the doorbell first before installing it.
For the receiver: In order for the receiver to work, simply plug it into a standard wall socket in
the room.
Transmitter: the transmitter can be installed in 2 different ways.
Installation method 1: Double-sided adhesive tape (recommended installation method)
1. Once you have determined the mounting position, clean the flat surface where the
transmitter is to be mounted.
2. Tear off one side of the double-sided adhesive tape and attach it to the underside of the
transmitter. Tear off the other side, place the transmitter on the wall and press for 10
seconds.
Installation method 2: Screws/plugs (optional installation method)
Prepare a drill, Phillips screwdriver and slotted screwdriver before installation.
1. Mark out the two mounting holes.
2. Drill two holes on the markings and insert the 2 expansion screws supplied with the
package.
3. Screw on the transmitter's bracket or base.
Troubleshooting
1. The receiver does not sound
• Check the doorbell battery and replace it if necessary.
• The plug on the receiver is loose.
• The receiver may be out of range of the doorbell.
• The receiver may not have been paired with the doorbell.
• Make sure the volume control is not at the lowest level.
2. Limited range
• Metal structures, as well as door frames made of uPVC reduce the range of the product.
Avoid installing the transmitter or receiver close to metal structures.
• Other equipment may cause radio interference that affects your doorbell.
• Walls and ceilings reduce range.
• Low batteries reduce the range. Change the battery every 12 to 18 months.
Specifications
Operating voltage for receivers inserted in a wall socket:
AC 85 ~ 265 V
Operating voltage for a battery-powered receiver:
3 AAA batteries (sold separately)
Wireless range:
Over 150 metres in open air
Audible area:
300 feet
Selectable ringtones:
58
Volume range:
0~110 dB, 5 levels
Receiver’s power consumption:
< 0.5 W
Transmitter’s power consumption:
< 10 mW
Doorbell battery:
CR2032 battery (included)
Expandable (yes or no):
Yes
Operating frequency:
433.92 MHz ± 280KHz
Operating temperature:
-30°C ~ 70°C
EN
Summary of Contents for Sigrid
Page 2: ...2 16...
Page 15: ...15 16...
