1. FEATURES
2. PRECAUTIONS
3. SPECIFICATIONS
4. INSTRUCTIONS
3/8” DR + 1/2” TWIST SOCKET SET
®
The material used is G43400 (UNS) or SNCM439 (JIS), a type of highly hardened alloy steels.
10 sockets with the followed sizes: 3/8"DR sockets: 8mm, 10mm, 12mm, 13mm;
1/2" DR sockets: 14mm, 15mm, 16mm, 17mm, 19mm, 21mm.
Includes 2 punch bars.
Use a 3/8"DR or 1/2”DR to operate the socket
•
•
•
•
The twist sockets are especially helpful when the screw nuts are worn or rusted.
The sockets are designed to be used with ratchet wrenches. Never use them with an air wrench..
•
•
EN
Step 1
Choose a suitable-sized socket
Step 2
Use a wrench to unfasten the nut anticlockwise (Fig. 2).
Step 3
Use the punch bar to punch nuts stuck tightly in the socket (Fig. 4).
CAUTION
Always read completely the instruction manual before working.
Never use the tool in the areas that it is not designed for.
DO NOT use the twist sockets to install new nuts.
Always wear eye protection that meets OSHA and ANSI Z87.1 standards.
Always wear hand gloves when working with the tool.
Ensure the work area has adequate lighting.
Keep children and unauthorized persons away from the work area.
Keep work area clean and tidy and free from unrelated materials.
DO NOT allow untrained persons to use the kit.
•
• Do not use impact tools to operate these sockets.
•
•
•
•
•
•
•
•
www.9circleint.com
