909 KSBL26CCG Instruction Manual Download Page 6

6

• 

Keep your distance. The blower emits exhaust fumes. 

Ensure bystanders keep a safe distance.

• 

Ensure you use oil-mix fuel. Ensure that you mix 40 parts 

unleaded fuel to 1 part engine grade oil. If not, the engine 

will overheat and cause damage to your blower.

• 

Never fill fuel tank indoors. Never fill fuel tank when engine 

is running or hot. Do not smoke when filling fuel tank.

• 

Stop the engine before re-fuelling.

• 

Stop the engine and disconnect the spark plug wire:

  –  If the blower starts to vibrate abnormally (find and 

remove the cause of the vibration immediately).

• 

Reduce the throttle before turning off the engine and turn 

the fuel off when you have finished blowing.

• 

The user is responsible for the safety of other people, animals 

and objects in the working area. Keep children and domestic 

animals at a safe distance while the blower is in use.

Additional safety instructions for the inbuilt 

battery pack

• 

The inbuilt battery pack for this tool has been shipped in a 

low charge condition.You should charge the battery pack 

fully before use.

• 

To ensure the longest battery life and best battery 

performance, always charge the battery when the air 

temperature is between 18–24°C. Do not charge the 

battery pack when the temperature is below 0°C, or 

above 40°C. This is important. Failure to observe this 

safety rule could cause serious damage to the battery 

pack.

• 

Do not incinerate the inbuilt battery pack even if it is 

seriously damaged or can no longer hold a charge. The 

battery pack can explode in a fire.

• 

Never attempt to open the inbuilt battery pack for any 

reason. If the plastic housing of the battery pack breaks 

open or cracks, immediately discontinue its use and do 

not recharge it.

• 

The inbuilt battery pack utilizes nickel-cadmium cells. 

Cadmium is considered to be a toxic material. Use an 

environmentally safe disposal unit at a municipal waste 

disposal centre to dispose of a damaged or worn out 

battery.

Additional safety instructions for the charger

• 

Before using the charger, read all the instructions and 

cautionary markings on the charger as well as the 

instructions on using the battery pack.

• 

Only charge your Blower indoors as the charger is 

designed for indoor use only.

• 

WARNING

. Do not allow any liquid to come into contact 

with the charger. There is a danger of electric shock.

• 

To allow the appliance to cool down after charging, do 

not place it in a hot environment such as a metal shed or 

open trailer left in the sun.

• 

The charger is not intended for any use other than 

charging the exact type of rechargeable appliance as 

supplied with the charger. Any other use may result in the 

risk of fire, electric shock or electrocution.

• 

The charger and appliance supplied with it are specifically 

designed to work together. Do not attempt to charge 

the battery pack with any other charger than the one 

supplied.

• 

Do not place any object on top of the charger as it could 

cause overheating. Do not place the charger near any 

heat source.

• 

Do not pull on the lead of the charger to disconnect it 

from the power source.

• 

Make sure that the charger cable is positioned where 

it will not be stepped on, tripped over or otherwise 

subjected to damage or stress.

• 

Do not use an extension cord unless it is absolutely 

necessary. The use of an improper extension cord could 

cause the risk of fire, electric shock or electrocution.

Summary of Contents for KSBL26CCG
















Reviews: