909 EDG4 Instruction Manual Download Page 3

3

Description of symbols

The rating plate on your tool may show symbols.  

These represent important information about the  

product or instructions on its use.

Wear hearing protection.  

Wear eye protection.  

Wear breathing protection.

Double insulated for additional protection.

Conforms to relevant standards  

for electromagnetic compatibility.

 Keep bystanders  

at a safe distance

 

Thrown objects

 

 

Rotating cutting blade

 

Direction of edger blade rotation

 

Warning

 

Read instruction manual

Disconnect the mains plug if the cord is 
damaged or entangled.

 

Introduction

Your new 909 power tool will more than satisfy 

your expectations. It has been manufactured under 

stringent 909 Quality Standards to meet superior 

performance criteria.
You will find your new tool easy and safe to operate, 

and, with proper care, it will give you many years 

of dependable service.

CAUTION.

 

Carefully read through this entire Instruction 

Manual before using your new 909 Power Tool. Take 

special care to heed the Cautions and Warnings.
Your 909 power tool has many features that will make 

your job faster and easier. Safety, performance, and 

dependability have been given top priority in the 

development of this tool, making it easy to maintain 

and operate.

Environmental protection

Recycle unwanted materials instead 

of disposing of them as waste. All tools, 

hoses and packaging should be sorted, 

taken to the local recycling centre and 

disposed of in an environmentally safe way.

Specifications

Voltage:  

230-240V ~ 50Hz

Input power:  

1200 W

No load speed:  

4,700 RPM

Depth of cut: 

25 mm, 31 mm, 38 mm

Size of blade:  

190 mm

Bore size: 

13 mm

Weight: 

6.5kg

This edger is double insulated. There are two independent 

barriers of insulation to protect you from the possibility of 

electric shock.

Summary of Contents for EDG4














Reviews: