ACTIVATION GUIDE
Spectralink Base and Handset Activation
3
Handset Activation
Once you’ve activated the base, you can now connect the handsets to it.
Important
: If you have multiple handsets, be sure to activate your handsets in the exact order specified in the
Order Shipped
email.
1.
Order Shipped Email
—Refer to the
Order Shipped
email for the
Activation Codes
for the handset(s) you wish to activate. This email also
specifies the order to activate them in.
2.
Check Your Base Unit
—Be sure you’ve already activated the base unit and it is within 100 feet of the handset(s).
3.
Power Down Handset
—Power down the handset you are activating by holding down the left softkey for 2 seconds, then press
Yes
.
4.
Power Up Handset
—Wait 2 minutes, then hold down the left softkey for 2 seconds to power up the handset.
5.
Enter Activation Code
—You will see
Enter AC
(Activation Code) on the phone screen. Enter the 4-digit activation code for the handset.
Enter AC code...
1
Number:
5683
OK
Exit
Auto-subscription
spectralink
7520
TIP:
If you are not prompted to
Enter AC
, power down the
handset, wait 2 minutes
and power it up again. If
that fails, please refer to
the
Advanced
Activation
section of this document for
instructions.
After you enter the activation code, you will see
Connecting...
on the handset screen.
Connecting...
Menu
Auto-subscription
Shortcut
spectralink
7520
Menu
1002
Shortcut
16:57
spectralink
7520
You will see your extension number on the display. Your handset is ready to use.
