How do I factory default a Poly D230 base station?
Objective
Factory resetting a Poly VVX D230 Base station to clear all previous configuration and put the device back to default
settings.
Applies To
• Poly VVX D230 DECT
Procedure
1. Ensure the base unit is powered on. Under normal working conditions the
FIND
led on the base will be solid red.
2. On the rear of the device locate the recessed
RESET
button located between the power input and the
PC
Ethernet
port.
3. Using a tooth pick or paper clip depress the
RESET
button and hold for about 10 to 15 seconds. Release the
button once the
FIND
led on top of the unit starts flashing.
4. Once back at factory default settings the device will need to be reconfigured to connect to the 8x8 network. See
the article posted
.
Updated: Thu, 08 Jun 2023 21:57:56 GMT
Powered by
1
