150Mbps Wireless ADSL2+ Router
User Manual
14
Method one
: Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on the
rear panel of AWRT-150, and insert the other end into the wall socket.
Method two:
You can use a separate splitter. External splitter can divide the data and voice,
and then you can access the Internet and make calls at the same time. The external splitter has
three ports:
• Line: Connect to the wall jack
• Phone: Connect to the phone sets
• Modem: Connect to the ADSL LINE port of AWRT-150
Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on the rear panel
of AWRT-150. Connect the other end to the MODEM port of the external splitter.
Step 2:
Connect the Ethernet cable. Attach one end of a network cable to your computer's Ethernet
port or a regular hub/switch port, and the other end to the LAN port on the AWRT-150.
Step 3:
Power on the computers and LAN devices.
Step 4:
Attach the power adapter. Connect the power adapter to the power connector on the rear of
the device and plug in the adapter to a wall outlet or power extension.
3. Quick Installation Guide
3.1. Configure PC
After you directly connect your PC to the AWRT-150 or connect your adapter to a Hub/Switch
which has connected to the Router, you need to configure your PC's IP address. Follow the steps
below to configure it.
