ASSEMBLY INSTRUCTIONS
I
C
J
B
G
Panel M
Panel L
Build the hanger section of the bench
by attaching profile C (2) together using
profile J (7) and FBHSCS (14). Connect
the hanger section between A profiles
using anchor fasteners (4) and tighten
down at desired height.
Cap off A profiles with profile G (1) using
anchor fasteners (2).
Attach panel M (1) to top of build using
FHSCS (6).
See figure 4
.
Figure 3
Figure 4
For the bench top subassembly
attach profile B (2) and profile I (2) to
each side of panel L (1) using FHSCS
(4). Connect B profiles using profile G
(1) and anchor fasteners (2).
Connect subassembly to build using
FHSCS (2) in front uprights of bench.
See figure 3
.
3
4
Important:
The maximum weight capacity for bottom wire mesh
panel is 50 pounds. The maximum capacity for the
bench top panel is 400 pounds. The top shelf panel has
a maximum capacity of 100 pounds.
Summary of Contents for Xtreme DIY
Page 1: ...XDIY1708...