How to assembly the blender cup
：
1
）
Remove the small lid (follow by PG1.A) or rotate the ring buckle (follow by PG1.B).
PG1
2
）
Put lid B2 on the blender cup B1(follow by PG2)
.
3
）
Put B3 in B2, and screw on (follow by PG3).
4
）
When all are done, clockwise and screw the jar on the base (follow by PG4).
B1: Blender cup
B2: lid
B3: Lock cylinder
Attention
：
Add ingredients by removing the lock cylinder during operation. Please pay close attention during operating. Once it’s done,
unplug it. And wash the jar after use.
Disassembly procedures after use
：
1)
Anti-clockwise to 0 level, and unplug.
2)
Unscrew the jar and place it on table.
3) Take B2 out by hand.
4)
Hold the glass handle with one hand, hold the glass body with the other hand, and slowly tilt to pour out the liquid.
Recommend Tips
：
Remove the seed core and hard skin of the fruit, cut it into a mixture, put it in a cup, and then put water. The optinum
amount of food is 600 grams and the water is 900 grams. Do not exceed the maximum scale of the juice cup. Put the lid
on and screw the jar on blender. Plug in and set the speed controling at level 4 ~ 6. Stop it after operating for 3mins, in
order to keep the good performance to the machine, the total operation time shall not exceed 15-min.
Meat Mincer Function
How to assemble and use meat mincer
：
1) To install the meat grinder accessories, first install the meat grinder blade M6 on the head of the meat
grinder screw M4, put on the required meat grinder cutter M7 (coarse hole, medium hole or fine hole), pay
attention to align the groove between the meat grinder
sieve
M7 and the meat grinder m3, and tighten the
locking nut M5 on the meat grinder M3. (PG1)
2) Disassemble the front cover (PG2).
3) Press the eject button at the front of the machine, hold the meat grinder M3, connect it to the transmission
part of the front cover, and rotate it counterclockwise to the locking position. (PG3)
4) Align the discharge port of tray M2 with the feed port of meat grinder M3 and install it in place (PG4)
5) Place a container at the outlet of the meat grinder. Clean the pork and cut it into strips. The width should not
exceed the feed inlet of the tray M2.
6) Insert the power cord plug into the socket, Then set the speed knob to the desired gear,put the meat on the
tray M2 and put it into its feeding port. Please use the pusher M1 to slowly press the meat into the feeding port
of the meat grinder. Do not put your fingers into the meat grinder M3.