7R300 Quick Installation Guide
Appendix
：
Troubleshooting
What can I do if I forgot my password?
1) Restore the 7R300’s configuration to its factory default settings. (With 7R300 powered on, press and hold
the
Reset
button for about 10 seconds before releasing it).
2)To log in the Web Management page, use the default user name and password: admin, admin. To connect
to the Wireless Network, use the default password on the label.
3)Try to configure 7R300 once again by following the instructions in the previous steps of the QIG.
Declaration
ShenZhen 7inova Technology Limited All rights reserved.
Without ShenZhen 7inova Technology Limited’s permission, any unit or individual should not be allowed to
imitate, copy, reproduce or translate this manual some or all of the content, should not transmit or use in any
form (electronic, mechanical, photocopying, recording, or other possible means)for any commercial,
profitable purposes.
is ShenZhen 7inova Technology Limited’s registered trademark. All other trademarks or
registered trademarks mentioned in this document are owned by their respective holders. Specifications and
information referred in this manual are for reference only, its content might be updated without prior notice.
This manual uses as only a guide, all statements and information in this manual does not constitute a
warranty of any kind.
- 17 -
