76 PROJECTS TT MOUNT 3.0, Quick Start Manual

Page: 2 / 2

IMPORTANT
ENSURE SCREWS ENGAGE
THROUGH NUT BODY
Mark position of bracket
and measure width of bar
centres.
Use guide to calculate
screws and spacers
required.
Attach Computer to mount,
undo straps and choose
approx position of mount for
optimum viewing.
Using 2.5mm allen key replace both
side screws and add spacers as
required.
Loosely secure screws to allow
brackets to freely rotate and move
during next step.
Place mount into desired
position, thread straps
through each bracket.
Pull vertically to
remove slack and
smooth down velcro.
STEP ONE STEP TWO
STEP FOUR
Align head of mount to
desired angle, tighten each
screw finger tight or until
resistance is felt.
Re adjust straps if
necessary.
Excess straps may
be cut for a neat
finish.
STEP
FIVE
STEP
THREE
.COM
2.5mm
? MM
¯ƱóŪėóƛė -ǗƱƛó͸ÝŇėĞ
͸Ʊŵ͸͸͙ŨŨ͚ ͸Ʊŵ͸͸͙ŨŨ͚ ¯ĐƛĞǒƣ͸͙ŨŨ͚ ¯ƘóĐĞƛƣ͸͙ŨŨ͚
̆́ ̊́ ̃́ ͟
̆̅ ̊̅ ̃́ ̃
̆̇ ̊̇ ̃́ ̄
̇́ ̂́́ ̃̆ ̆
̇̅ ̂́̅ ̃̆ ̆Ι̃
̇̇ ̂́̇ ̃̆ ̆Ῑ
̈́ ̂̂́ ̄́ ̂́
̈̅ ̂̂̅ ̄́ ̂́Ι̃
̈̇ ̂̂̇ ̄́ ̂́Ῑ
̉́ ̂̃́ ̄̆ ̂́Ῐ
̉̅ ̂̃̅ ̄̆ ̂́ῘΙ̃
̉̇ ̂̃̇ ̄̆ ̂́ῘῙ
̊́ ̂̄́ ̅́ ̂́ῘῙΙ̃