5
Installation
First, install the electrostatic sticker
.
Clean your rear windshield and put the
electrostatic sticker on the recommended
upper area of the windshield, as shown in
the picture. Press the sticker to remove
air bubbles out.
Second, install the rear camera.
Paste
the rear camera onto the electrostatic
sticker.
Next, connect the power supply.
Connect the rear camera with the rear
signal wire (connect ports A and B
together). Run the wire along the top of
the rear windshield, C-pillar, top of the
side windows, to the main device. Plug
the Mini USB 8pin power port into the
main device (the AV/IN port of the main
device).
Note
: The installation and wiring
methods for different vehicles may differ
from what described in the user manual.
The installation shall be conducted by a
professional technician
.
Finally, adjust the camera angle.
Turn
on the main device and switch to rear
camera recording mode. Adjust the
camera angle based on the preview
screen to ensure that the camera is facing
the back of the vehicle.
