5
Properly connected signal cables.
CAUTION!!!
Please take special care when installing the PCB board and connecting the signal cables. Incorrect installation may
result in the damage to the computer or the turbo card.
When Wicher 500i rev.2c card is properly installed, you can finally put it through its paces.
X2 jumper configuration
Position 0 – ON / OFF turbo card
Position 1 – 25 MHz / 12 MHz
Position 2 – RAS13 ON / OFF
CAUTION
.
RAS13 enabled for two-sided memory
RAS13 disabled for single-sided memories
