Sum
13
Bootloader button and status LED location for SumCDTV
When pressing and holding the
Bootloader
button, one should connect the device via USB A-A cable to the PC running Windows. After
being recognized by Windows OS, adapter switches into
Bootloader
mode which is confirmed with continuous pulsation of the
Status
LED.
The next required step is to launch on the connected Windows PC
SumFlasher
application that will update firmware of the adapter.
When application detects connected Sum adapter it will enable
Open Hex File
button. Firmware update procedure looks as follows:
One should press
Open Hex File
button and choose a file containing updated firmware image (which results in enabling
Programming
and
Reset Device
buttons).
One should press
Programming
button and wait for the flashing process to complete.
After completion of the flashing process, one should press
Reset Device
button, which switches Sum back into normal operation
mode allowing its disconnecting from the PC.
Having followed the above procedure one can connect the adapter back to the Amiga
.
All files required for the updating procedure can be downloaded from
website.
Status
Bootloader
