Seat your child in the stroller or car
seat and fasten the safety harness as
per their manufacturer's instructions.
Unzip the front panel cover. Save the
PlushPOD’s back for later use.
Slip the front panel’s inner bottom
pouch over the bottom of the stroller
or car seat to secure the cover.
Use the hook & loop straps located on
the sides of the front panel cover to
attach to sidebars.
Use the elastic drawstring located
underneath the top flap to adjust the
snugness.
Pull the elastic drawstring under the
pouch to adjust tightness.
On Stroller
On Car Seat
1
2
3
4
5
6
HOW TO ONLY USE FRONT PANEL COVER
WARNING
:
Never leave child unattended in this product. Make sure that the child’s face is not covered by any part of this product. Child should never be placed face-down in this product. Do not use this
product as sleepwear or bedding. The child should not put buttons, plastic ends, snaps or other parts of this product into her/his mouth. Always use care when using zippers to avoid injury to the child.
User Manual
PLUSHPOD
PANEL COVER ONLY
Pull the car seat’s 5-point harness
through the large back opening.
Seat your child on the PlushPOD in
the car seat and fasten the safety
harness as per manufacturer's
instructions.
Place the PlushPOD onto the car seat
and unzip the front panel to open the
PlushPOD.
Zip the PlushPOD cover up.
Detach the removable back panel to
reveal the large back opening and to
eliminate material between your
baby’s back and the car seat. Store it
for stroller use.
Place the PlushPOD onto the
stroller.
Unzip the PlushPOD cover.
1
Optional: Slip the pouch located
behind the hood over the top of the
stroller to secure the PlushPOD’s
stability.
2
4
Seat your child on the PlushPOD in the
stroller and fasten the safety harness
as per manufacturer's instructions.
6
To further envelop your child’s head,
connect the side flaps to the hood
with the hook & loop fasteners.
8
Pull the stroller’s 5-point harness
through the opening slits located on
the back of the PlushPOD by choosing
the height of the slits corresponding
to your child’s size.
5
Use the hook & loop straps located
on the sides of the PlushPOD to
attach to the stroller’s back or
sidebars in order to secure it.
3
Zip the PlushPOD cover up and adjust
the snugness using the elastic
drawstring located underneath the
top flap to create a smaller
enclosure around your child’s face.
7
1
2
3
4
5
HOOK & LOOK STRAPS
FRONT
BACK
1
2
3
4
5
REMOVABLE
PANEL
HOOD
HOOK & LOOP STRAPS
ANTI SLIP BACK
2 ADAPTABLE CROTCH
HARNESS SLITS
5-POINT HARNESS
OPENING
3 ADAPTABLE SHOULDER
HARNESS SLITS
HOW TO USE ON STROLLER
HOW TO USE ON CARSEAT
The PlushPOD is machine washable. The care label is
located on the internal side of the product.
ZIPPERED POCKET
HOOK & LOOP
CLOSURE
SOFT PLUSH LINING
FLUFFY CUSHY FLAP
BREATHABLE WATER
REPELLANT SHELL
