Remove the zippered extensions (see
“How to adjust length).
According to your child’s age, weight and desired comfort:
Open the B212e and place into the
bassinet.
1
Base: Zip up to one of the double zippers to reduce
or expand the blanket in width.
1
Close bottom of extension #1.
2
2
Lay your baby on the B212e. Make
sure your baby’s face is uncovered at
all times.
3
Zip the B212e up using the most
narrow zipper position to cover your
baby.
Do not use the B212e as bedding in a
crib or at home bassinet.
4
HOW TO USE IN BASSINET
The two extensions are already attached to the B212e when purchased.
Size 0-6M: No extension
Take note:
Set extensions aside for when your child has outgrown
the first and second size. We do not sell replacements.
Size 6-18M: Base + 1 extension
Unzip extensions.
1
Size 18-4T: Base + 2 extensions - Full size
Zip up extension #2 to base.
1
Zip up extension #1 to extension #2.
2
Close bottom of extension #1.
3
Snap bottom end of base
closed.
2
Zip up extension #1 to base.
1
Close bottom of extension #1.
2
HOW TO ADJUST LENGTH
HOW TO ADJUST WIDTH
WARNING
:
Never leave child unattended in this product. Make sure that the child’s face is not covered by any part of this product. Child should never be placed face-down in this product. Do not use this
product as sleepwear or bedding. The child should not put buttons, plastic ends, snaps or other parts of this product into her/his mouth. Always use care when using zippers to avoid injury to the child.
User Manual
BLANKET 212 EVOLUTION
Seat your child on the B212e in the
carseat and fasten the safety harness
as per manufacturer’s instructions.
Whether the carseat is used in the
car or on a stroller, you can leave the
B212e open or closed as desired.
Pull the carseat 5-point harness
through the large back opening.
Detach the removable back panel to
reveal the large back opening and to
eliminate material between your
baby’s back and the car seat. Store it
for stroller use.
Adjust the B212e to your child’s size
by removing the zippered extensions
(see “How to adjust length”).
Unzip to open the B212e.
1
4
Place the B212e onto the stroller.
2
Zip the front of the B212e up.
7
Put the hood on or off your child’s
head and adapt closure as desired by
pulling the safety buttoned,
contoured, elasticized hood.
8
Pull the stroller’s 5-point harness
through the opening slits located on
the back of theB212e by choosing the
height of the slits corresponding to
your child’s size.
5
Use the hook & loop straps located
on the sides of the B212e to attach to
the stroller’s back or sidebars to
secure it.
3
6
2
Adjust the B212e to your child’s size
by removing the zippered extensions
(see “How to adjust length”).
1
4
5
Place the B212e onto the carseat and
unzip to open the B212e.
3
6
HOW TO USE ON STROLLER
HOW TO USE ON CARSEAT
After the winter season, you may machine was the B212e and store
it in its packaging until the winter days are upon us again. The care
label is located on the internal side of the product.
Seat your child on the B212e in the
stroller and fasten the safety harness
as per manufacturer's instructions.
FRONT
BACK
