14.
UNPACKAGING AND INSTALLING
The YAV90CIN is supplied vacuum packed to avoid the intrusion of external agents during
transport and storage and on an antistatic package. To start using the product just remove
vacuum bag carefully to avoid damage.
To install the YAV90CIN simply insert the module on a VPC receiver, vertical or horizontally,
according to the Receiver arrangement. Once it is completely inserted, fix YAV module with two
4-40 UNC screws on each side of connector. Tight them using a 3/32 Allen wrench at full
revolutions. Torque should be 0.45Nm max.
Finally, connect the X1 rear plug of CAN bus and power supply (24VDC) to start using the
module.
