21
20
Automatic Cruise Indication
Switch On
Switch Off
If the auto cruise is switched on, the indicator remains on.
If the auto cruise is switched off, the indicator is off.
LED Headlight Status Indication
Switch On
Switch Off
If the LED headlight is switched on, the indicator remains on.
If the LED headlight is switched off, the indicator is off.
3 Gears Indication
Gear 1 Gear2 Gear 3
The Gear 1 is enabled.
The Gear 2 is enabled.
The Gear 3 is enabled.
When the scooter is powered off, press the Power switch briefly to turn it on.
When the scooter is operating, long press the Power switch to turn it off.
During riding the scooter, press the LED headlight switch briefly to turn on the LED headlight and press again to turn it
off. (The LED headlight switches circularly from ON to OFF to ON.)
During riding the scooter, double press the Power switch to switch gears, with the setting range being switched from
Gear 1, Gear 2 to Gear 3. The scooter will save the gear selected by the last time before shutdown.
If there is anything abnormal about the scooter, the warning indicator will flash, with the flashing value
E1-E6 displayed.
Errors
Codes
Solutions
Communication
Fault
E1
Brake Failure
E2
Throttle
Failure
Motor Fault
E3
E4
Controller
Failure
E5
Overheated
Motor
E6
Please check whether the taillight is on. If it is off, it means that the power supply is insufficient.
Please replace the controller or the LED display. If it is on, please check whether the connecting
wire between the controller and the LED display is open-circuit.
Please check whether the
brake is pressed.
Please check whether the
throttle is pressed.
Press and release the brake to reset the brake.
If not, please check whether
the connecting wire between
the brake and the LED display
is short-circuited or open-circuit.
If it is open-circuit or short-circuited,
please replace the connecting wire.
Replace the brake handle.
Replace the throttle.
Press and release the throttle to reset the throttle.
If not, please check whether the
connecting wire between the
throttle and the LED display is
short-circuited or open-circuit.
If it is open-circuit or short-
circuited, replace the connecting
wire.
Check whether the motor
and controller wire is
connected correctly.
If it is not connected correctly, please adjust and connect the
motor and the controller correctly.
If it is connected correctly, please disconnect the connecting wire
and measure whether the internal resistance between the
three-phase wires of the motor is within a reasonable range,
generally within 0.1Ω-1Ω. If it exceeds the range, the motor needs
to be replaced.
If the motor temperature is too high, please wait for the motor
to cool to the appropriate working temperature.
If the motor temperature is normal, check whether the
connecting wire of the controller is short-circuited. If it is
short-circuited, please replace the connecting wire.
If the controller is damaged, please replace the controller.
Check whether the motor
temperature is too high.
Brief Use Instructions
8 Indication Description