background image

31

30

WEEE needs to properly dispose of and recycle the product. This sign indicates that the product should not be disposed of 

together with other domestic waste throughout the EU.

Therefore, in order to prevent possible harm of uncontrolled waste treatment to the natural environment or human health, 

it is necessary to recycle it and promote the sustainable reuse of material resources. To recycle the used product, use the 

return and collection system or contact the retailer who can use the product for environmentally safe recycling.

Batteries or battery compartments are marked in accordance with the European Directive 2006/66/EC and the amendment 

2013/56/EU on batteries and accumulator cells and scrap batteries and accumulator cells.

The directive applies to the recycling framework of waste batteries and accumulator cells throughout the EU. The label on 

the battery indicates that the battery should not be discarded, but recycled at the end of its service life according to the 

directive.

According  to  the  European  Directive  2006/66/EC  and  the  amendment  2013/56/EU,  batteries  and  accumulator  cells  are 

labeled to indicate that they will be collected separately and recycled at the end of their service life. The label on the battery 

may also contain the chemical symbols of the relevant metals in the battery (Pb, Hg and Cd). Users should not dispose of 

batteries and accumulator cells as garbage, but use the collection framework available to customers to recycle and dispose 

of  batteries  and  accumulator  cells.  With  the  engagement  of  users,  it  is  important  to  minimize  any  potential  impact  of 

batteries  and  accumulator  cells  on  the  environment  and  human  health  due  to  the  presence  of  potentially  hazardous 

substances.

Before placing electrical and electronic equipment (EEE) into a waste collection stream or waste collection facility, users of 

equipment containing batteries and/or accumulator cells must remove these batteries and accumulator cells for separate 

collection.

5TH WHEEL is a registered trademark of Invanti (Beijing) Technology Co., Ltd (hereinafter referred to as "Invanti"), which is 

authorized to be used by Solowii (Beijing) Technology Development Co., Ltd. Android and Google Play are trademarks of 

Google  Inc.  and  the  App  Store  is  the  service  mark  of  Apple  Inc.  Their  respective  owners  reserve  the  trademark  rights 

mentioned in this user manual.

The products involved in the registered trademark of 5TH WHEEL are protected by relevant patent laws. For relevant patent 

information, please visit the website: http://www.invanti.com.

In this user manual, we make our utmost to describe all the instructions and functions of the M2 electric scooter. With 

constant updates and iteration, the M2 electric scooter received may be slightly different from the product features shown 

in this manual. For more information, please visit the Apple App Store (iOS) to download the App.

Please note that Invanti has developed products with many functions and different models of products, and some of the 

functions mentioned here may not be applicable to the product or equipment received. The manufacturer reserves the right 

to change the design and function of the M2 electric scooter and documents without notice.

2021 Invanti (Beijing) Technology Co., Ltd all rights reserved.

If you encounter any problems when using the product, please feel free to contact us through the following methods or scan 

the QR code to get a quick response and a satisfactory solution.

Amazon Platform: “Contact Seller”

Email Address: [email protected]

Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive.
The  products  and  parts  (cables,  wires,  etc.)  of  Invanti  (Beijing)  Technology  Co.,  Ltd  comply  with  the  requirements  of 

directive 2011/65/EU on restricting the use of certain hazardous substances in electrical and electronic equipment ("RoHS 

recasting" or "RoHS 2")

15 Authentication

Contact Us

Applicable model: M2

The EU Compliance Statement is as follows:

EU Battery Recycling Information:

Trademark and Legal Statements

The product has passed the ANSI/CAN /UL-2272 certification of the CSA.

The battery complies with the UN/DOT 38.3.

According to the Federal Communications Commission (FCC) Compliance Statement as follows:

The product complies with part 15 of the FCC rules, and the operation must meet the following two conditions: (1) the 

product  should  not  cause  harmful  interference,  and  (2)  the  product  must  accept  any  received  interference,  including 

interference that may lead to accidental operation. Any change or modification not expressly approved by the responsible 

party may make void the user’s right to operate the product.

Get 24/7 Customer Service 

Use Camera or QR Scanner to Scan
Or Visit: https://5thwheel.afterservice.vip

Summary of Contents for 5LCHM02



















Reviews: