P.
DISTORTED
-
Press the “AUTO TUNE” button on the speakers until it matches the
frequency of the transmitter.
-
Change the position of the channel selector on the transmitter. You must
then press the “AUTO TUNE” button on the speakers.
-
Battery capacity is too low. Replace with new batteries.
-
Ensure the volume level of speakers is adjusted properly.
-
The speaker is too far from transmitter, move closer.
-
The input level of the audio signal is too low. Turn up the volume of the
audio source equipment.
TECHNICAL SPECIFICATIONS
Transmission Mode
:
UHF stereo
Carrier Frequency
:
900 MHz
Operation Voltage
:
Transmitter, DC 6V 300mA
Speaker, 8 X “C” size Alkaline batteries
(included) or DC 12V 750mA adaptor
Remote Control Unit, 2 X ‘AAA’ size batteries
(included)
Frequency Response
:
40Hz – 12KHz
Distortion :
1.5%
S/N Ratio
:
65dB (typical)
Channel Separation
:
35dB (typical)
Operating Distance
:
Up to 50 metres (150 feet)
Output Power
:
2 x 5W (Max)
WARNING:
This device complies with AS/NZS CISPR 13:2004 and AS/AZS
22:2006 Australian Standards Tests.
This is a Class A Product
This device may cause radio interference in some situations in
which case the user is required to take adequate measures when
operating this device
Summary of Contents for 5RBWS2
Page 3: ...P COMPONENT IDENTIFICATION TRANSMITTER SPEAKER ...
Page 10: ...P ...
