P L A Y E R I N S T A L L A T I O N
A N D R E M O V A L
6
·
Before final installation, connect the wiring according to the time diagram
and make sure that it all works correctly.
·
To ensure proper installation, use only the parts supplied with the device.
Using foreign parts may cause malfunction.
·
In order to maintain warranty, this product must be installed at an
authorized dealer.
·
Install the device in such a way that it does not interfere with the driver
and does not injure the passenger in case of a sudden stop, for example,
during emergency braking.
·
Avoid installing the unit in places where it may be exposed to high
temperatures, such as direct sunlight or hot air from the heater, and where
it will be exposed to dust, dirt, or excessive vibration.
·
Be sure to remove the front panel before installing the device.
For proper installation of the device, the compartment for installing radio
equipment in the dashboard must correspond to the following dimensions
In addition, you should check if the depth of the compartment is sufficient
to accommodate the receiver. Before starting work, make sure that the
vehicle’s ignition is off. It is recommended, if possible, to disconnect the wire
from the “-” terminal of the car battery.
53мм
182мм
