manualshive.com logo in svg

5DT Data Glove Ultra Series, User Manual, Page: 17 / 60

Share
Download
5DT Data Glove Ultra Series User Manual Download Page 17

 

 

 

 

 

13

Some items may me disabled when no glove is open. 

4.4.3  Tab Bar 

The tab bar allows you to switch between the Setup view and the currently open 
gloves. The blue dot on the tab icon indicates a wireless glove. 

 

Figure 12 – The Tab Bar 

4.4.4  The Sensor Graphs 

The sensor graph is a graphical representation of the data from the sensors as 
it arrives. Two graph representations can be shown: 

The scaled graph (showing the values scaled between 0 and 4095) 

The raw graph (showing the raw values between 0 and 4095) 

4.4.4.1  Scaled Graph 

The scaled graph shows the scaled version of the sensor value, normalized 
between 0 and 1. The default color for this graph is blue. 

 

Figure 13 – The Scaled Graph 

4.4.4.2  Raw Graph 

The raw graph represents the raw sensor value coming from the glove. 
Additional to the actual graph of the raw values (drawn in red by default), the 
upper (drawn in green by default) and lower calibration (drawn in orange by 
default) values are also plotted, as shown in Figure 14. 

Upper calibration value

Lower calibration value

Raw sensor value

 

Figure 14 – The Raw Graph 

 

Summary of Contents for Data Glove Ultra Series





























































Reviews:

No comments