BACK PANEL CONTROLS & FEATURES
Guideline to Operate the Column
Safety Instructions
Page 3
Page 2
K
C
O L
IN/OUT
±
1 LF
Impedance : 4
W
±
2 HF
Impedance : 8
W
BI-AMP
K
C
O L
IN/OUT
±
1 Full Range
Impedance : 4
W
±
2 NC
PASSIVE
MADE IN INDIA
www.5core.com
5C-WC-12x2
E 300DX
• Place the Column in dry and well ventilated place. Considerable heat is generated
inside the Column during continuous use, therefore do not block the top cover
ventilation holes by placing anything on top of the Column.
• Connect column with amplier near about 300W for proper audio output.
• WATER AND MOISTURE:
In order to prevent any re or shock hazard, do not
expose this equipment to rain or moisture.
•
VENTILATION:
The Column should be situated so that its location or position
does not interfere with its proper ventilation, Also do not insert or drop anything
into the ventilation holes.
•
PREVENTION OF LOSS IN SPEAKER CABLES:
Always use thick cables for low
impedance speakers connections, Use of cable type 23/38 or thicker is
recommended as heavy current ow through the cables.
•
EQUIPMENT TO BE USED:
Please use a amplier of near about 300W for proper
output.
ISO 9001:2015
M5400913IN
CERTIFICATE NO.: 16RQ07AY
Speakers and Compressor Drivers used in Column
Frame: MS, 12”
Cone: Paper body with cotton edge
Impedance: 8
W
Power Output: 150W R.M.S.
Magnet: 135X57X20 (mm)
Voice Coil: 1.5” Voice coil with Aluminium heat sink
FR 12135 DC
Diaphragm: 1.35" with aluminum heat sink
Material: Titanium Diaphragm
Hise 7x3
with Piezo Tweeter
