4x4Tough 15-50222 User Manual Download Page 7

7

2 x DETACHABLE TORCHES

1. 

To detach the torches, slide in an upward motion from the front 

of the jump starter (see figure A).

2. 

Turn the battery cover at the end of the torch anti-clockwise to 

“open” and fit it with 3 x AAA sized battery and turn clockwise 

to close the cover (6 x AAA sized batteries are required for 2 x 

torches). Press the lens of the torch to turn to torch ON and OFF.

3. 

The two torches can be combined together to form a larger torch.

MAINTENANCE & STORAGE

This unit may be stored in any position. Make sure the clamps are 

secure inside the booster cable storage holders. Store at room 

temperature.
If not used for a prolonged period of time, recharge it every 

3 months to maximise the life of the battery.

DISPOSAL 

• 

Please consider when disposing of electronic products such 

as a jump starter that some components can by recycled and 

recovered for re-use. Do not attempt to dissemble any electronic 

product unless you are a trained electronics technician.

• 

Many councils hold e-waste (electronic waste) collections. 

Contact your nearest council to enquire about the best method 

of disposal in your area.

SPECIFICATIONS

1. 

Dimensions: 

310 x 260 x 163

2. 

Product Weight: 

8Kg

3. 

Built-in Battery :  

12-volt 17Ah Rechargeable lead

4. 

Compressor :  

260 PSI with reading gauge

5. 

12 Volt Power Port Rating :   12-volt 10A max.

6. 

USB Power Port Rating :  

5-volt 500mA

7. 

Solar Panel Rating :  

0.5 Watt

8. 

Work Lights: 

3 X LED

9. 

Torch:  

2 (4 LED) X Detachable Torches (operated by 6 x AAA sized battery)

10.  Charging time :  

 55 hours via AC power outlet  

15 hours via DC in-vehicle charger

FAQ

Q. What is the USB port used for?
A. 

Charging USB compatible devices.

Q. Is it important regularly keep your jump starter battery charged?
A.

 Yes, best practice is to recharge after every use and at 3 month intervals to ensure battery does not discharge fully.

Q. Why might an appliance connected to the jump starters 12V DC socket not work?
A.

 Check the appliance does not exceed the rated output current of the jump starters 12V DC socket.

Figure A

Summary of Contents for 15-50222









Reviews: