Accessories
Micro USB cable
Micro USB car charger
Mount
Memory card
Memory card reader
Functional operation
Installation
Easy to install onto any windshield, and the 12V charger will fit any vehicles 12V outlet.
Charging:
A. Powered by a rechargeable lithium-ion battery
Two methods of charging the Dash Cam. One way is through the supplied
charger, and the second method is by using the supplied microUSB cable using
your computer.
B. connect 12V car charger
When powering on your vehicle, the unit will automatically power on. When you
power down your vehicle, the Dash Cam will take up to 5 seconds to power off
and automatically save the previously recorded file.
Note: You must only use 5V output voltage. It is recommended that you always
use the original charger, as it was designed to work with your Dash Cam. Some
vehicles have constant 12V power flowing from the 12V outlet. In this case, you
must long press the power button on your Dash Cam to shut it down.
Video mode
When the Dash Cam is powered on, it enters Video mode. If the unit has a TF memory
card inserted, it will automatically start recording. When the unit is recording, the green
indicator light will blink. If the green indicator light is solid, the unit is not recording and is
in standby mode.
Emergency lock
While the unit is recording, you can press the MODE/SOS (5) button to lock the
currently recording file. Locking a file will make it un eligible to be recorded over during
the looping procedure.
Summary of Contents for 4SK010
Page 1: ...4SK010 ...
