2.4
Economy Mode
The economy mode allows the temperature of the water in the Spa to drop up to 10 degrees below the set temperature without re-heating. Only
use this mode if your Spa will not be used for an extended period of time. Thanks to the high insulation values, keeping the Spa at the desired
temperature is more economical than constantly reheating the water.
By pushing the button you can program:
EDx –
duration of the economy cycle,
ESx –
start time of the economy cycle
3 Other
3.1
Display Lock
It is possible to lock the display partially or entirely, which can be a useful safety measure when the Spa is often used by children.
There are two settings possible:
Partial
(LOCK P):
buttons operating pumps and the light can be operated.
Full
(LOCK F):
none of the buttons will function.
• Press and hold the button for 3 seconds the partial display lock (LOCK P) is activated.
• Press and hold the button for 6 seconds all buttons are disabled (LOCK F).
• Press and hold the button again for 5 seconds the display is reactivated (ULOC).
•
The ED (duration)
Condition varies from 0 to 24 hours selected with the arrow buttons.
0 = function deactivated and 24 = function always active.
•
The ES (time to commence Economy Mode)
Now you can enter time that you want to start the first filter cycles.
After that the ECO cycles will start.
2 Water fi ltration & Temperature
7
