PRO-360 V2.3/4 10/20
Page 2
www.4qd.co.uk
1. Introduction
The Pro-360 is an advanced digital PWM motor controller for currents up to 360A.
It uses a specialist microprocessor to control a full H-bridge design that does not
require relays for reversing. The display provides key information to the operator,
and can be mounted separately to the controller if required. It has a full range of
features and is very easy to configure if required.
2. Do's and D
on’ts
Warning
– the Pro-360 does not have reverse polarity protection.
Connecting the battery wires incorrectly WILL destroy the controller.
Do
•
Do r
ead the instructions fully
before installing.
•
Do
take care to connect the
battery wires with the correct
polarity.
•
Do
fit a motor suppression
capacitor, and ferrite rings.
•
Do
twist the motor wires
together if possible.
•
Do
call 4QD if you are
uncertain about something.
Do not
•
Do not
allow water to get onto
the circuit boards.
