The 4ms Company Passive Mult is an essential tool for any builder looking to extend their patching capabilities. For an in-depth understanding of its features and usage, make sure to check out our detailed Builder's Manual. Download it for free from our manualshive.com and unlock the full potential of this versatile product.
Step 1: Insert Jacks/Prep Mounting
Install the eight jacks to the green PCB. The jacks should be inserted on the side with the white
rectangles and circles. Tip: Feed the longer bent pin in first, then push the other two pins in snugly. Push
each jack down so it’s flush against the PCB. See photos below.
