ASSEMBLY INSTRUCTIONS
INSTALLATION
This heater should be installed by a competent person, i.e. a qualified electrician.
The ideal mounting position for the panel heater is on the ceiling, directly above the area to be heated. If this is not possible, panel heater can be mounted
on a wall and angled downwards. In this situation, ensure the mounting height is in the range of 2.1-2.7m and the table is within 2.5m of the wall.
Wall/ceiling mount swivel brackets are provide with the heater which has been specifically designed to allow this product to be fitted to a wall or ceiling,
before drilling the holders for the wall/ceiling make sure it is solid and that there are no hidden water pipes or electric wires.
For mounting heights more than 2.7m, we recommend the use of the optional accessories to reduce the height of the heater to 2.3m-2.5m. This will
increase the effectiveness of your panel heater. Refer to the mounting accessory section for more information.
Electrical connections/GPO’s should not be located at the back of the heater. They should be located outside the physical contour of the unit to minimize
heat build-up behind the units.
If the heater is to be mounted on an incline (eg. Vaulted ceiling), ensure the electrical connection is located at the lowest point of the heater.
EN
INSTALLATION ACCESSORIES:
1. sliding block
2 szt.
2. bracket (L shape)
4 szt.
3. the handle screw (M6)
2 szt.
4. screw (M6 x 12mm)
8 szt.
5. washer (
Ø
6mm)
8 szt.
6. nut (M6)
4 szt.
7. screw (M6 x 60mm)
4 szt.
STANDARD MOUNTING BRACKETS
The panel heater comes with a pair of standard mounting brackets. These adjustable brackets allow direct ceiling or wall mount, and come with preset angle options.
Step 1
: Assembly the adjusting bracket to sliding bracket
Step 3
: Fix adjusting bracket
into the wall or ceiling
by expansion screws.
Step 4
: Installation of two
adjusting bracket, make sure
lock brackets tight by screws
Step 2
: Installation of sliding bracket & heater as arrow pointed.
