H
Handbook
EAP738 Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
3
1
Power LED
EAP738 status. The Status LED will start blinking when the restart/reset button
is pressed. For the first 5 seconds, the LED will blink slowly (restart), and after 5
seconds, the LED will start blinking quickly (reset).
2
2.4G LED
2.4G Wi-Fi status. The 5G LED will blink when there is 2.4G traffic.
3
5G LED
5G Wi-Fi status. The 5G LED will blink when there is 5G traffic.
4
Uplink LED
Uplink status. The Uplink LED will light up when there is traffic passing through
the Uplink port.
5
LAN LED
LAN status. The LAN LED will light up when there is traffic passing through the
LAN port.
6
USB Port
USB interface reserved for future use.
7
LAN Port
The ports for connections with LAN side devices.
8
Uplink (PoE) Port
Offers uplink connection. This port can be used to connect to a controller,
gateway, or directly to the Internet. 802.3af PoE is also supported.
9
Restart / Reset
Press once to restart the system; to reset the system to factory default settings,
hold for more than 5 seconds.
10
12V
1 A
Attach power adaptor here.