9
4. Turn the large plastic knobs counter clockwise to retract the threaded rods.
Retract one completely and the other approximately ¾ of the way. It does
not matter which one is open all the way. This will open up the skewer cups
enough to place the bike, and make it easier to mount.
5. Back the rear wheel of the bike into the trainer frame. Aim the wheel between
the magnet arrays.
Tip
If the magnet arrays are not far enough apart for easy installation, gently pull them
open by hand while the trainer is off. Pull both sides simultaneously.
3
GETTING STARTED
5
4
4
