-5-
9. Flight environment requirements
10. Pre flight preparation instructions (using remote control operation)
10.1 Opening:
Please choose an outdoor open environment with no wind, snow, and low wind. When
flying, please stay away from people, trees, power lines, tall buildings, airports, and
signal transmission towers. Don't fly indoors in a small and crowded environment.
Note: Place the aircraft in the right direction, with the nose facing straight ahead,
and be sure to place it on a level ground!
Turn on the power supply of the aircraft and place it on a horizontal surface. At this
time, the aircraft placed on the horizontal surface will automatically enter the frequency
synchronization state, and the front white light and rear red light will flash
。
Turn on the power switch button on the remote control (step 1), and the power
indicator light on the remote control will flash. Push the throttle lever up to the top (step 2)
and then to the bottom (step 3), and the aircraft indicator light will change from flashing
to constantly on.
10.2 Remote control start frequency alignment:
Warn
When using the remote control to operate, the app can only watch (take
photos/videos). If you need to use the app to operate, the remote control
cannot be used!
Warn
The aircraft/remote control must be fully charged, otherwise it cannot take
off!
