1
2
3
6. Lithium battery charging instructions:
7. Name of each part of the remote control:
6.1 Buckle the battery lock of the aircraft.
6.3 Charging: Insert the USB port of the USB charging cable into the computer USB port (or use
5V 2A power adapter), and connect the other end of the USB charging cable to the battery
socket. When charging, the red indicator on the module battery is on, and when the battery is
fully charged, the red indicator light goes out, which means that the charging is complete.
6.2 Remove the battery.
Laptop
Desktop
PC
Mobile
power
USB adapter
USB power
socket
It must be charged with the aircraft charging cable provided by the factory, and other
charging cables cannot be used. Be sure to remember to avoid accidents.
Accelerate
Right fine-tuning
Left fine-tuning
Throttle/left and
right lever
Advance
fine-tuning
Reverse
fine-tuning
Switch
360° roll
Headless mode (short
press)/one key return
(long press)
Obstacle avoidance mode
Advance/reverse/left/right
control lever
One-key take-off/one-key
landing
Emergency stop (short
press)/one-key calibration
(long press)
Warning
APP can only be viewed
(photographed/recorded) when
using the remote controller, and
the remote controller cannot be
used when using APP.
Warning
Steps for installing a
remote control
04
