06
9.REMOTE CONTROL BAT TERY INSTALL ATION:
10.PRE-FLIGHT ENVIRONMENTAL REQUIREMENTS:
11.INSTRUCTIONS FOR PRE-FLIGHT PREPARATION
(use remote control)
9.1 Remove the battery cover
1.5V AAA
1.5V AAA
A A A B a t t e r i e s
B a t t e r y c o v e r
1.5V AAA
1.5V AAA
1.5V AAA
1.5V AAA
1.The positive and negative poles and the positive
and negative poles of the battery box must be
identified when they are loaded into the battery,
and must not be loaded in reverse
2. Never Mix old and new batteries
3.Do not mix different types of batteries
NOTE
Points to note when charging
：
Never leave a live battery in a hot place, such as an open flame or an electric heating device,
or it will be damaged or explode.
Never hit or strike a hard surface with a battery.
Do not disassemble the battery.
Do not immerse the battery in water. Store the battery in a dry place.
Do not leave the room while charging.
Please choose to fly in an open air environment without wind and snow. Stay away from people,
trees, power lines, tall buildings, airports and signal towers. Don’t fly in an indoor environment
that is too small and has too much stuff.
Warning：APP can only be viewed（photographed/recorded）when using the remote controller，
and the remote controller cannot be used when using APP.
11.1 Aircraft Alignment
：
Turn on the power of the aircraft and place it
on the horizontal plane. At this time, the aircraft
placed on the horizontal plane will automatically
enter the counter-frequency state and the front
white light will flash.
Note: Put the plane in the right direction, nose to the front, must be placed on the horizontal ground
Bedienungsanleitung24.de
