NOTES:
•
If there is no separate garage entrance, perform all programming changes
and extensions of radio systems from inside the garage.
•
After programming or extending the radio system, perform a function test.
•
Only use original components when putting the radio system into service or
extending it.
•
Local conditions may affect the range of the radio system.
•
When used at the same time, GSM 900 mobile phones can affect the range.
3
Description of the radio switch
1
LED, bi-colour
2
Transmitter buttons
3
On / off switch for connected control
elements
4
1× 1,5 V battery, type: AAA (LR03)
4
Initial start-up
After inserting the battery, the radio switch is ready for operation.
ATTENTION
Destruction of the radio switch by leaking batteries
Batteries can leak and destroy the radio switch.
▶
Remove the battery from the radio switch if it is out of use for a long period
of time.
4006055 RE / 10.2014
13
ENGLISH