Revision: IR
Date: 15 February 2018
6 Welsh Place Landsdale WA 6065
Tel:
(08) 9302 4757
Fax:
(08) 9302
4524
Website:
Email:
ABN 51 156 666 161
Page 4 of 10
3.
ASSEMBLY INSTRUCTIONS
•
Remove the contents from the box and
remove the packaging and place in the
appropriate bin.
•
Lay out the parts and inspect for any damage.
•
Locate the supplied allen key and remove the
two bottom button head screws on the
backrest frame.
•
Align the spigots on the bottom of the
backrest frame with the tubes on the seat
frame as shown.
•
Slide the backrest frame down into the seat
frame until the tubes meet and fit the button
head screws back into the backrest frame.
•
Adjust the seat frame height to the required
position. (refer to operating instructions).
•
Clip on the the padded backrest as shown
below.