![background image](http://html1.mh-extra.com/html/4-acoustic/sx-25000/sx-25000_operation-manual_3068454021.webp)
Page 21 of 24
SX-Series Operation Manual REV01 0820
1 2 3 4 5 6 7 8 9 10
MAINS IN
OUT A+B
OUT B
OUT C+D
OUT D
D=2 2
+ -
/
C=1 1
+ -
/
BRIDGE=1 2+
-/
D=1 1
+ -
/
B=2 2
+ -
/
A=1 1
+ -
/
BRIDGE=1 2+
-/
B=1 1
+ -
/
PIN1=GND (Ground) / PIN2=SIG+(HOT) / PIN3=SIG- (Cold)
Serial Number:
CH-B IN
CH-A IN
CH-C IN
CH-D IN
MODE
SENSITIVITY
STEREO
6
5
CHC
CHC
CHD
CHD
ON ON
4
3
CHA
CHC
CHB
CHD
ON ON
2
1
ON ON
2
1
ON ON
2
1
ON ON
2
1
ON ON
2,0V 1,4V 1,0V 0,775V BRIDGE
PARALLEL
CHA
10
9
8
7
CHA
CHB
CHB
CHB
CHB
CHC
CHC
ON ON ON ON
CHC right Mid/High signal
Audio Source
(DSM-428)
CHB right Sub signal
CHA left Mid/High signal
CHB left Sub signal
CH C / D
4 Wire Cable
1+/1- = CH C
2+/2- = CH D
CH A / B
4 Wire Cable
1+/1- = CH A
2+/2- = CH B
1 2 3 4 5 6 7 8 9 10
MODE
SENSITIVITY
STEREO
6
5
CHC
CHC
CHD
CHD
ON ON
4
3
CHA
CHC
CHB
CHD
ON ON
2
1
ON ON
2
1
ON ON
2
1
ON ON
2
1
ON ON
2,0V 1,4V 1,0V 0,775V BRIDGE
PARALLEL
CHA
10
9
8
7
CHA
CHB
CHB
CHB
CHB
CHC
CHC
ON ON ON ON
Stereo Mode
1+
1-
2-
2+
CH D (SUB)
CH C (MID/HIGH)
2 Wire Cable
1+/1- = CH C
1+
1-
2-
2+
2 Wire Cable
1+/1- = CH A
1+
1-
2-
2+
CH A (MID/HIGH)
CH B (SUB)
1+
1-
2-
2+
1+
1-
2-
2+
1+
1-
2-
2+
9.6) Stereo System Setup 2 subwoofer and 2 Mid/High cabinets (SX-44000 and SX-46000)
Stereo system setup with four channel amplifier and four wire cable. Two subwoofer and two Mid/High cabinets.
Maintain proper polarity (+/–) on output and input connectors. Use Class 2 output wiring.
IMPORTANT: Turn off the amplifier and unplug its power cord.
INPUTS:
Connect analog input wiring for all channels.
CHA left Mid/High signal
CHC right Mid/High signal
CHB left Sub signal
CHD right Sub signal
OUTPUTS:
Speakon® output configuration figure 9.7
Plug the four-wire Speakon® cable to the two subwoofer input socket and to the CHA (CHC) output
socket of the amplifier.
The wiring is:
Mid/High 1+/1-
Sub 2+/2-
The woofer must be connected 2+/2-. The link Speakon® socket in the sub must link the 1+/1- signal
to the mid/high cabinet.
To connect the mid/high cabinet plug a two wire Speakon® cable into the link socket of the subwoofer
and the cabinet you want to connect. The wiring must be 1+/1-.
DIP SWITCHES:
Select the input sensitivity accordingly your audio source or mixer.
Select the Input Mode to Stereo.
9.) SYSTEM SETUP
Figure 9.7