S-Series Camera Quick Start Guide |
VX-2S-D4-RIA
12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
14
10.
Click
OK
to on the Network Camera Settings form then click
Apply
on the VIGIL Server Settings window to
save the new settings.
The camera will now be saved to VIGIL and can be accessed and controlled via the VIGIL Server UI. Any other
applicable VIGIL utilities (VIGIL Client, View Lite II) that have been interfaced with the VIGIL Server will also be
able to access and control the camera. See the VIGIL Server and VIGIL Client User Guides for more information
on interacting with the camera and its footage. Visit the
support documentation.
1.2
Access UI via Web Browser
Steps:
1.
Open a web browser.
2.
Input the IP address of the network camera in the URL address bar, e.g., 192.0.0.64 and press the
Enter
key
to enter the login interface. Alternatively, if the camera is interfaced with VIGIL Server, the web UI can be
instantly deployed by opening the camera’s
Network Settings
form in VIGIL Server Settings > Cameras Tab
and clicking the
Web Settings
button.
3.
Input the user name and password and click
Login
.
NOTE:
The username/password for the camera will have been configured during camera activation If the
camera has already been configured using one of 3xLOGIC’s setup tools (VIGIL Easy Setup Wizard, 3xLOGIc
Camera Setup Utility) then default credentials will have been changed by the installer (this is a standard
security precaution enforced by the setup tools). Contact your security network administrator for
credentials.
NOTE:
English is the only supported language.
Figure 2-3
Login Interface
4.
To view video and have full access to the camera’s configuration settings, you will need to install the Web
Components plug-in. Click “Activate Web Components” to start the plug-in installation.
NOTE:
Depending on your web browser, you may be required to authorize the installer to run.
NOTE:
You may have to close the web browser to install the plug-in. Reopen the web browser and log in
again after installing the plug-in.