VISIX Stereoscopic People Counting Camera | Quick Start Guide |
VX-VSS-20
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
6
1.
Keep the 3xLOGIC logo facing the same direction as the Front arrow indicator on the back of the device.
See below example for reference:
Figure 3-4
Front Arrow and 3xLOGIC Logo
2.
Make sure the camera is mounted vertically above the passenger flow (90°, vertical to the ground).
Reference the below example:
Figure 3-5
Passenger Flow (perpendicular to the door
）
3.
For some scenarios where there are multiple cameras, mount the cameras as per the two below
guidelines:
►
If there are turnstiles, each camera should be mounted to monitor a specific turnstile
Figure 3-6
Sketch map of multiple cameras installation
►
If there is no turnstile, mount the cameras in one line, and make sure the cameras have the same
focal length. Then, keep a proper distance between each camera according to the overlap (see the
yellow area below) of the adjacent two cameras’ counting width. The suggested overlapping length is
between 0.2-0.5m.
Figure 3-7
Sketch map of multiple cameras installation