Info Commands
www.3ware.com
27
info
cid diag
This command extracts the internal log of diagnostic events of controller
cid,
controller diagnostics suitable for technical support usage. Note that some
characters might not be printable or rendered correctly (human readable). It is
recommended to save this output to a file, where it can be communicated to
tech support.
Example:
3ware CLI> info c0 diag
--Port[ 5]-
DIT status: DRV_PRESENT (0xFF)
Model #: Maxtor 6Y080M0
Serial #: Y3LLQWPE
Drv FW #: YAR51EW0
Capacity: 160086528 (0x098ABA00)
Features: SMART: 1, Security: 1, 48-bit addr: 0, Acoustic: 1,
Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0
Acoustic: 0xFE, def=0xC0 (0xFE=best performance)
Security: Status=0x7 (ENABLED, LOCKED)
SATA NCQ: 0
Udma Mode: 0x5 (UDMA-100)
Pwr Cycles: 14
….
SELF TEST: all tests completed.
UA::SpareUnit(0) checking for spare needed
UA::SpareUnit done.
Auto Clean: 0
DcbMgr::UpdateStatus: UNIT 0 (time 7704019)
DcbMgr::WriteSegment(map=0xFFE, segID=0x8, events=22,
error=0x0)
DcbMgr::UpdateStatus: (finish 7704024)
SETTINGS: Saving USER parameters ... done. (count=1, bytes=9)
SETTINGS: Saving USER parameters ... done. (count=1, bytes=9)
SETTINGS: Saving USER parameters ... done. (count=1, bytes=9)
SETTINGS: Saving USER parameters ... done. (count=1, bytes=9)
Send AEN (code, time): 0x31, 0x7a2d6b
Synchronize host/controller time
(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)
