8
Reset to factory setting:
Reset to
factory setting
OK
Restoring the factory setting will delete all settings and transmitters!
The solar panel then automatically goes into sleep mode. No programming can be carried out in the sleep mode.
To end the sleep mode, press and hold the program key for 2 seconds > the tube motor starts up once and the solar panel switches to pairing mode.
2
Delete all paired transmitters
All transmitters
are deleted
OK
1 x Press button
P2 / Set Up
1 x Press
Stop-button
1 x Press button
P2 / Set Up
Tubular motor starts 1 x,
LED indicator flashes 1 x
Tubular motor starts 1 x,
LED indicator flashes 4 x
LED indicator
flashes 1 x
Press and hold program
button for 11 sec.
Tubular motor
starts 3 x
Release
programm button
LED indicator
flashes 3 x
3T-MOTORS Tubular motors 12V
| Programming
PROGRAMMING
Programming (pressing the buttons) must be carried out within 10 seconds.
Otherwise the system returns to its original state.
Note:
The following 3T-MOTORS transmitters do not have a P2 / Set Up button:
Radio wall transmitter
WS1
Radio wall transmitter
WS2
Radio wall transmitter
WSE2
Radio timer
WSTF1
Radio timer
WSTF5
Radio mini transmitter
FMSF
Button combination:
Press Up + Stop buttons simultaneously (FMSF / WS1 / WS2 / WSE2).
Press the Set and Mode buttons simultaneously (WSTF1 / WSTF5).
