![background image](http://html1.mh-extra.com/html/3svision/n5072/n5072_user-manual_3198207014.webp)
N5072
Speed Dome Network Camera
1.3M / 720P Real-Time / 18X
- 14 -
Software Installation
After the hardware has been installed, insert the installation CD into the CD-ROM driver and
run the
“Cam Finder.exe” following the steps below to search and change the IP address of
N5072 Speed Dome Network Camera.
NOTE
:
If the network environment has the router, please refer to
Appendix: Set up the Router
Setting with IP Camera
for different environment description.
1. Start the Camera Setting.
Run the
Cam Finder.exe
from the installation CD.
2. Set the IP address of the Network Camera.
Click
Search
to find the IP Camera on the LAN, the factory IP setting
192.168.0.20
appears on the screen.
3. Change the IP address and related settings for the network environment
When you find the camera, click it and the settings will appear on the right side. You can
change the settings for the new network environment as you need.
NOTE :
Enter new settings in the field of the
IP
, Netmask and Gateway fields and keep the
settings in other fields unchanged.