Network DVR
D4091
4ch
/
D8091
8ch
/
DG091
16ch
- 65 -
Tour
Use this setting to assign several preset positions. After the preset positions are set make
them into a tour list and set the time for the duration you want. The camera will monitor
different areas according to your assigned schedule.
If the preset position has been setting at 5 for the tour list, the camera will go from 1 to 5
and will go back to 1 and run to 5, over and over again.
It can be triggered by event or run on the schedule time.
Please follow below step to set the tour list.
1. Open the setting page of Tour by click
SET
.
2. Start to set the Tour Group. (0 is the default figures of the value at the pull-down
menu.)
3. Click
Add to List
after set the preset position by click the pull-down menu.
4. Select the time between 5 and 10 seconds.
5. Click
Save
to the configuration settings.
Tour Group
Tour Point
Preset Point
Speed
DWTime
Summary of Contents for D4091
